Tag Archives: promyshlennoct and equipment

Bekomat Compressor

The main classical selection criteria for products and technical purposes: technical data, ergonomics and design, maintenance and service, price / quality ratio. For medical products, you must have sanitary certificate issued by the Russian Ministry of Health. Main technical data compressors can be produced in different versions: – oil – oil-free (without cylinder lubrication and seals). According to modern requirements, oil vapor in compressed air should not be. This can be achieved either using a compressor, which was originally working on the oil-free technologies, or after installing oil-injected compressor quality of compressed air (drier filters of the three stages of cleaning, including adsorption). Performance. When working in the 'two hands' one dental unit consumes 60 to 100 l / min. When working an assistant in the 'four hands' when you can use an air-abrasive treatment of teeth with the use of dust collection and saliva ejector, the performance should be 120-250 l / min.

Compressed air for the entire spectrum Dental equipment is unusual and should not be less than 0,5 MPa (5 bar). Receiver should be made of corrosion-resistant steel or have an internal corrosion-resistant coating (galvanization). Noise. Compressor dental supplies is considered acceptable if it is "noise" level to 80 dB (A). Means to reduce noise, usually a noise absorbing cover, allowing to reduce the sound pressure level of 65 dB (A). Recommended compressor to supply additional devices – desiccant, adsorption filter. The fact that even the air, the compressed oil-free compressors, will contain condensed moisture and vapor absorbed from the air.

For the separation of moisture is drier, the vapor-adsorption type filter. Ergonomics and design. The compressor should be compact, simple and easy to use, with the appearance of it should not violate the aesthetics of office / clinic. Maintenance must be enclosed in a periodic change of filters and condensate drain from the receiver (for convenience and to improve air quality, and increasing equipment life in general, recommended installation of automatic steam traps with an electronically controlled series boge Bekomat, removes condensate from receiver without loss of pressure in the system). Reliability. Not every technique, especially tempting low prices is robust. Therefore, to reasonably purchase dental compressor industrial performance, long life, ensuring a continuous high-quality work and service intervals of at least 16,000 hours of operation.

Metal Cabinets

Metal cabinets, a metal structure made of stainless steel with a thickness of 0.6 mm, equipped with locks, designed for storing documents, personal belongings, heavy duty, expensive office furniture, industrial, commercial and household appliances in establishments, offices, etc. Presented metal furniture has an attractive appearance and a number of advantages compared to furniture made from particleboard. Metal furniture is more durable and taxing to use. Fireproofing that is not unimportant for storage of documentation. Easy to carry sanitation detergents, which is important for institutions to strict sanitary standards of operation. A classic design with high ergonomic meets the most demanding users. In the directory 'Kailas', you can find different series of metal cabinets (Russia): Archive collapsible metal cabinets coupe (tambour) are used in most organizations, companies, institutions and companies that work with large documents, accounting, legal, technical documents, contracts and other paper and electronic media. Produced a total width of 960 to 1800 mm, total height of 200 to 2000 mm, depending on the model.

Filing file cabinets are used where needed store a large number of cards, invoices, payment orders, price lists, contracts and other paper media. Metal racks are designed for archival storage of various documents, a large amount of Paper carriers, heavy goods, expensive office, industrial, commercial and household appliances in offices, offices, production areas. Produced a total width of 600 to 1000 mm, total height from 880 to 2000 mm, Depending on the model, prefabricated metal enclosures srk used for decorating offices, manufacturing facilities, sports facilities, storage bags and personal items in shops, offices, chambers of storage. Produced a total width of 600 to 800 mm, total height of 500 to 1800 mm, depending on the model; Safes sr (welded) used to store clothing workers, personal belongings of office workers and schoolchildren. Produced a total width of 300 to 700 mm, total height of 500 to 1850 mm, depending on the model Safes shrs (teams) are used for storing clothes, bags, personal items at stores, schools, offices, production facilities, sports facilities, medical facilities and equipment storage rooms. Produced a total width of 120 to 1230 mm, overall height 1800 mm, depending on the model. As well as accessories for cabinets series sr and SRK: mailing and latch locks, racks and shelves for cabinets, and a series of SHRS: riveting, loop under the padlock made in Italy, stands under the cabinet, postal locks.